|MODEL||Volume (l)||Dimensions (LxIxH)||He (mm)||Hs (mm)||C (mm)||Ø Pipe (mm)||Weight (Kg)||FT|
|GORTECH NS2||1.360||1.560 x 960 x 1.230||930||820||750 x 750||110||100|
|GORTECH NS4||2.410||2.580 x 960 x 1.230||930||820||750 x 1415||110||165|
|GORTECH NS6||3.770||4.070 x 960 x 1.230||920||805||(750 x 750) + (750 x 1415)||125||270|
|GORTECH NS10||4.820||5.080 x 960 x 1.230||880||770||2 x (750 x 1415)||160||305|
Appropriated to separate greases and oils of vegetable and animal origin from wastewater.
Made in Polyethylene, manual cleaning and buried installation. Without energetic consumption.
Nominal sizes (l/s) greater than 10 l/s, available on request. Other materials, including carbon steel protected, available on request.
ECODEPUR® GORTECH® Grease Separators has CE marking, in accordance with the legal obligations that stems from the entry into force of the REGULATION (EU) N.º 305/2011 of the European Parliament, to Construction Products, fulfilling all the requisites of the European Standard EN 1825- 1.
ECODEPUR® GORTECH® Grease Separators does not need any power consumption; it’s based on materials gravitational separation with different densities of water.Heavier materials (sludge, sand, etc) settle into the Sludge Trap compartment and are trapped there. This compartment also holds Grease that easily floats.
For the separation zone goes water and substances lighter than water, including grease which will be separated.The grease will accumulate on the surface, while the clean water goes out at a level that does not allow the mixing of the phases.
To comply with current legislation, ECODEPUR® GORTECH® Grease Separators should be installed in these places:
ECODEPUR® GORTECH® Grease Separators do not need special care from a structural point of view, due to the high resistance and corrosion protection of the material from which they are made.
ECODEPUR® GORTECH® Grease Separators should be inspected, emptied, cleaned and refilled with clean water.